Knext

Factoid Details

‘A layer can be selective.’

[⟨det layer.n⟩ selective.a]

Learned by Reading

In the ICWSM 2009 Weblog Corpus:

New selective colour layer: REDS: – 42, + 81, + 48, + 21 YELLOWS: – 31, – 8, + 16, 0 WHITES: 0,0, 0, – 50 NEUTRALS: + 100, – 28, – 82, + 19 BLACKS: 0,0, 0, + 100 7.
(Parse)

In the ICWSM 2009 Weblog Corpus:

New selective colouring layer, opacity 50 % Reds: Cyan: + 100 Magenta: 0 Yellow: – 100 Black: 0 Yellows: Cyan: – 58 Magenta: 0 Yellow: 0 Black: + 39 Whites: Cyan: + 63 Magenta: 0 Yellow: – 27 Black: + 58 Neutrals: Cyan: – 58 Magenta: 0 Yellow: 0 Black: + 44 3.
(Parse)

In the ICWSM 2009 Weblog Corpus:

New Selective Color layer.
(Parse)

In the ICWSM 2009 Weblog Corpus:

Create a Selective Color layer – REDS: – 35 + 12 + 35 + 8 CYANS: + 100 + 47–100 – 51 WHITES: + 66–62 – 34–32 You’re DONE!. PSD Remember you may need to change / take out layers.
(Parse)

In the ICWSM 2009 Weblog Corpus:

Then create a Selective Colouring layer with these settings – green. 0 / – 61 / 0 / 0 cyan. + 100 / 0 / 0 / 0 4.
(Parse)

In the ICWSM 2009 Weblog Corpus:

Third and last selective coloring layer.
(Parse)

In the ICWSM 2009 Weblog Corpus:

Dublicate the Selective Coloring layer, and put it on Hue 100 % 007.
(Parse)

In the ICWSM 2009 Weblog Corpus:

Make a new selective colour layer: R: – 31,0, 74,0Y: 100,0, – 100,42G: 100,38, – 100,17C: 100,100,11,7B: 100,100,100,100W: 100,0, 0,5N: 6,0, 6,5B: 100,0, 0,100And you are done!
(Parse)

In the ICWSM 2009 Weblog Corpus:

Make a new selective colour layer: R: – 31,0, 74,0 Y: 100,0, – 100,42 G: 100,38, – 100,17 C: 100,100,11,7 B: 100,100,100,100 W: 100,0, 0,5 N: 6,0, 6,5 B: 100,0, 0,100 And you are done!
(Parse)

In the ICWSM 2009 Weblog Corpus:

New Selective Coloring layer.
(Parse)

In the ICWSM 2009 Weblog Corpus:

[1] prepare your base, sharpen if needed etc. [2] colour fill # DAF6F6, set to colour burn at 100 % [3] selective colour layer; reds: – 80, 10, 100, 2 yellows: 100, 0 – 100, 5 whites: 38, 52, 0, 2 neutrals: 17, 8, – 2, 0 [4] colour fill # 320B0B, set to exclusion at 100 % [5] selective colour layer; reds: – 100, 0, 100, 3 cyans: 90, 0, 0, 5 [6] add this texture…… and set to multiply at 84 % This may need to be adjusted depending on your image and you may need to duplicate your base (don’t move it anywhere, leave it above the original), set it to screen and adjust it to suit the image. other examples using this tutorial ;
(Parse)

In the ICWSM 2009 Weblog Corpus:

There’s a selective colour layer, but you could leave it out and get close to the same look, so it might be semi – translateable. to 1.
(Parse)

In the ICWSM 2009 Weblog Corpus:

Selective colour layer: REDS: – 61, 0, + 10, + 42 YELLOWS: 0,0, + 35, 0 WHITES: 0, 0, 0, – 41 BLACKS: 0, 0, 0, + 37 7.
(Parse)

In the ICWSM 2009 Weblog Corpus:

Selective Colouring Layer 1 – Normal, 71 % R: – 100, 0, + 100, 0 Y: – 54, + 100, + 100, + 100 Curves Layer 1 – Normal, 100 % Input; 185 – Output; 203 Input; 124 – Output; 155 Duplicate the first Curves Layer – Normal, 100 % Selective Colouring Layer 2 – Normal, 100 % R: – 54, 0, + 33, 0 Y: – 100, + 56, + 28, 0 C: + 67, 0, – 63, 0 B: + 35, 0, – 37, 0 N. + 17, – 1, + 1, 0 Duplicate the second SC Layer – Normal, 39 % Now, you crop, sharpen and add whatever you want.
(Parse)

In the ICWSM 2009 Weblog Corpus:

How do you copy a selective layer (or an adjustment layer) in one image and paste it onto another image?
(Parse)

In the ICWSM 2009 Weblog Corpus:

Make a selective colour layer.
(Parse)

In the ICWSM 2009 Weblog Corpus:

New selective colour layer: REDS: – 42, + 81, + 48, + 21 YELLOWS: – 31, – 8, + 16, 0 WHITES: 0,0, 0, – 50 NEUTRALS: + 100, – 28, – 82, + 19 BLACKS: 0,0, 0, + 100 7.
(Parse)

In the ICWSM 2009 Weblog Corpus:

I promise, it will be very easy to make, absolutely beginner friendly and it just includes one Selective Colouring layer, but it looks good as well if you leave it out.
(Parse)

In the ICWSM 2009 Weblog Corpus:

Add a Selective Color layer with these settings: REDS: – 100, + 100, – 100, – 30 YELLOWS: – 100, + 100, – 40, + 100 NEUTRALS: + 50, – 20, – 30, + 10 Make a new Curves layer and make one point.
(Parse)

And 95 more sentences.

NB: Do not link to this page – the URL for this factoid will change every time the available knowledge base is updated.

Queried on 2013-05-22.