Go to the first, previous, next, last section, table of contents.
This chapter describes the basic features of the GNU command line editing interface.
The following paragraphs describe the notation used to represent keystrokes.
The text C-k is read as `Control-K' and describes the character produced when the k key is pressed while the Control key is depressed.
The text M-k is read as `Meta-K' and describes the character produced when the meta key (if you have one) is depressed, and the k key is pressed. If you do not have a meta key, the identical keystroke can be generated by typing ESC first, and then typing k. Either process is known as metafying the k key.
The text M-C-k is read as `Meta-Control-k' and describes the character produced by metafying C-k.
In addition, several keys have their own names. Specifically, DEL, ESC, LFD, SPC, RET, and TAB all stand for themselves when seen in this text, or in an init file (@xref{Readline Init File}).
Often during an interactive session you type in a long line of text, only to notice that the first word on the line is misspelled. The Readline library gives you a set of commands for manipulating the text as you type it in, allowing you to just fix your typo, and not forcing you to retype the majority of the line. Using these editing commands, you move the cursor to the place that needs correction, and delete or insert the text of the corrections. Then, when you are satisfied with the line, you simply press RETURN. You do not have to be at the end of the line to press RETURN; the entire line is accepted regardless of the location of the cursor within the line.
There are only a few basic constructs allowed in the Readline init file. Blank lines are ignored. Lines beginning with a `#' are comments. Lines beginning with a `$' indicate conditional constructs (see section Conditional Init Constructs). Other lines denote variable settings and key bindings.
set command within the init file. Here is how to
change from the default Emacs-like key binding to use
vi line editing commands:
set editing-mode viA great deal of run-time behavior is changeable with the following variables.
bell-style
comment-begin
insert-comment command is executed. The default value
is "#".
completion-ignore-case
completion-query-items
100.
convert-meta
disable-completion
self-insert. The default is `off'.
editing-mode
editing-mode variable controls which default set of
key bindings is used. By default, Readline starts up in Emacs editing
mode, where the keystrokes are most similar to Emacs. This variable can be
set to either `emacs' or `vi'.
enable-keypad
expand-tilde
horizontal-scroll-mode
keymap
keymap names are
emacs,
emacs-standard,
emacs-meta,
emacs-ctlx,
vi,
vi-command, and
vi-insert.
vi is equivalent to vi-command; emacs is
equivalent to emacs-standard. The default value is emacs.
The value of the editing-mode variable also affects the
default keymap.
mark-directories
mark-modified-lines
input-meta
meta-flag is a
synonym for this variable.
output-meta
print-completions-horizontally
show-all-if-ambiguous
visible-stats
Control-u: universal-argument Meta-Rubout: backward-kill-word Control-o: "> output"In the above example, C-u is bound to the function
universal-argument, and C-o is bound to run the macro
expressed on the right hand side (that is, to insert the text
`> output' into the line).
"\C-u": universal-argument "\C-x\C-r": re-read-init-file "\e[11~": "Function Key 1"In the above example, C-u is bound to the function
universal-argument (just as it was in the first example),
`C-x C-r' is bound to the function re-read-init-file,
and `ESC [ 1 1 ~' is bound to insert
the text `Function Key 1'.
\C-
\M-
\e
\\
\"
\'
\a
\b
\d
\f
\n
\r
\t
\v
\nnn
\xnnn
"\C-x\\": "\\"
Readline implements a facility similar in spirit to the conditional compilation features of the C preprocessor which allows key bindings and variable settings to be performed as the result of tests. There are four parser directives used.
$if
$if construct allows bindings to be made based on the
editing mode, the terminal being used, or the application using
Readline. The text of the test extends to the end of the line;
no characters are required to isolate it.
mode
mode= form of the $if directive is used to test
whether Readline is in emacs or vi mode.
This may be used in conjunction
with the `set keymap' command, for instance, to set bindings in
the emacs-standard and emacs-ctlx keymaps only if
Readline is starting out in emacs mode.
term
term= form may be used to include terminal-specific
key bindings, perhaps to bind the key sequences output by the
terminal's function keys. The word on the right side of the
`=' is tested against both the full name of the terminal and
the portion of the terminal name before the first `-'. This
allows sun to match both sun and sun-cmd,
for instance.
application
$if Bash # Quote the current or previous word "\C-xq": "\eb\"\ef\"" $endif
$endif
$if command.
$else
$if directive are executed if
the test fails.
$include
$include /etc/inputrc
Here is an example of an inputrc file. This illustrates key binding, variable assignment, and conditional syntax.
# This file controls the behaviour of line input editing for
# programs that use the Gnu Readline library. Existing programs
# include FTP, Bash, and Gdb.
#
# You can re-read the inputrc file with C-x C-r.
# Lines beginning with '#' are comments.
#
# First, include any systemwide bindings and variable assignments from
# /etc/Inputrc
$include /etc/Inputrc
#
# Set various bindings for emacs mode.
set editing-mode emacs
$if mode=emacs
Meta-Control-h: backward-kill-word Text after the function name is ignored
#
# Arrow keys in keypad mode
#
#"\M-OD": backward-char
#"\M-OC": forward-char
#"\M-OA": previous-history
#"\M-OB": next-history
#
# Arrow keys in ANSI mode
#
"\M-[D": backward-char
"\M-[C": forward-char
"\M-[A": previous-history
"\M-[B": next-history
#
# Arrow keys in 8 bit keypad mode
#
#"\M-\C-OD": backward-char
#"\M-\C-OC": forward-char
#"\M-\C-OA": previous-history
#"\M-\C-OB": next-history
#
# Arrow keys in 8 bit ANSI mode
#
#"\M-\C-[D": backward-char
#"\M-\C-[C": forward-char
#"\M-\C-[A": previous-history
#"\M-\C-[B": next-history
C-q: quoted-insert
$endif
# An old-style binding. This happens to be the default.
TAB: complete
# Macros that are convenient for shell interaction
$if Bash
# edit the path
"\C-xp": "PATH=${PATH}\e\C-e\C-a\ef\C-f"
# prepare to type a quoted word -- insert open and close double quotes
# and move to just after the open quote
"\C-x\"": "\"\"\C-b"
# insert a backslash (testing backslash escapes in sequences and macros)
"\C-x\\": "\\"
# Quote the current or previous word
"\C-xq": "\eb\"\ef\""
# Add a binding to refresh the line, which is unbound
"\C-xr": redraw-current-line
# Edit variable on current line.
"\M-\C-v": "\C-a\C-k$\C-y\M-\C-e\C-a\C-y="
$endif
# use a visible bell if one is available
set bell-style visible
# don't strip characters to 7 bits when reading
set input-meta on
# allow iso-latin1 characters to be inserted rather than converted to
# prefix-meta sequences
set convert-meta off
# display characters with the eighth bit set directly rather than
# as meta-prefixed characters
set output-meta on
# if there are more than 150 possible completions for a word, ask the
# user if he wants to see all of them
set completion-query-items 150
# For FTP
$if Ftp
"\C-xg": "get \M-?"
"\C-xt": "put \M-?"
"\M-.": yank-last-arg
$endif
This section describes Readline commands that may be bound to key sequences.
beginning-of-line (C-a)
end-of-line (C-e)
forward-char (C-f)
backward-char (C-b)
forward-word (M-f)
backward-word (M-b)
clear-screen (C-l)
redraw-current-line ()
accept-line (Newline, Return)
previous-history (C-p)
next-history (C-n)
beginning-of-history (M-<)
end-of-history (M->)
reverse-search-history (C-r)
forward-search-history (C-s)
non-incremental-reverse-search-history (M-p)
non-incremental-forward-search-history (M-n)
history-search-forward ()
history-search-backward ()
yank-nth-arg (M-C-y)
yank-last-arg (M-., M-_)
yank-nth-arg.
Successive calls to yank-last-arg move back through the history
list, inserting the last argument of each line in turn.
delete-char (C-d)
delete-char, then
return EOF.
backward-delete-char (Rubout)
quoted-insert (C-q, C-v)
tab-insert (M-TAB)
self-insert (a, b, A, 1, !, ...)
transpose-chars (C-t)
transpose-words (M-t)
upcase-word (M-u)
downcase-word (M-l)
capitalize-word (M-c)
kill-line (C-k)
backward-kill-line (C-x Rubout)
unix-line-discard (C-u)
kill-whole-line ()
kill-word (M-d)
forward-word.
backward-kill-word (M-DEL)
backward-word.
unix-word-rubout (C-w)
delete-horizontal-space ()
kill-region ()
copy-region-as-kill ()
copy-backward-word ()
backward-word.
By default, this command is unbound.
copy-forward-word ()
forward-word.
By default, this command is unbound.
yank (C-y)
yank-pop (M-y)
digit-argument (M-0, M-1, ... M--)
universal-argument ()
universal-argument
again ends the numeric argument, but is otherwise ignored.
As a special case, if this command is immediately followed by a
character that is neither a digit or minus sign, the argument count
for the next command is multiplied by four.
The argument count is initially one, so executing this function the
first time makes the argument count four, a second time makes the
argument count sixteen, and so on.
By default, this is not bound to a key.
complete (TAB)
possible-completions (M-?)
insert-completions (M-*)
possible-completions.
menu-complete ()
complete, but replaces the word to be completed
with a single match from the list of possible completions.
Repeated execution of menu-complete steps through the list
of possible completions, inserting each match in turn.
At the end of the list of completions, the bell is rung and the
original text is restored.
An argument of n moves n positions forward in the list
of matches; a negative argument may be used to move backward
through the list.
This command is intended to be bound to TAB, but is unbound
by default.
start-kbd-macro (C-x ()
end-kbd-macro (C-x ))
call-last-kbd-macro (C-x e)
re-read-init-file (C-x C-r)
abort (C-g)
bell-style).
do-uppercase-version (M-a, M-b, M-x, ...)
prefix-meta (ESC)
undo (C-_, C-x C-u)
revert-line (M-r)
undo
command enough times to get back to the beginning.
tilde-expand (M-~)
set-mark (C-@)
exchange-point-and-mark (C-x C-x)
character-search (C-])
character-search-backward (M-C-])
insert-comment (M-#)
comment-begin
variable is inserted at the beginning of the current line,
and the line is accepted as if a newline had been typed.
dump-functions ()
dump-variables ()
dump-macros ()
While the Readline library does not have a full set of vi
editing functions, it does contain enough to allow simple editing
of the line. The Readline vi mode behaves as specified in
the POSIX 1003.2 standard.
In order to switch interactively between emacs and vi
editing modes, use the command M-C-j (toggle-editing-mode).
The Readline default is emacs mode.
When you enter a line in vi mode, you are already placed in
`insertion' mode, as if you had typed an `i'. Pressing ESC
switches you into `command' mode, where you can edit the text of the
line with the standard vi movement keys, move to previous
history lines with `k' and subsequent lines with `j', and
so forth.
Go to the first, previous, next, last section, table of contents.